Stabilizer

Carbon for high flights with zero wind kites.

Stabilizes your normally dynamic synergetic kite when flying high in some wind with a long line.

Length: 740, 740, 780 mm
Weight: ca. 5 g

The Stabilizer is built of a carbon tube and slotted connectors on each end.

The Stabilizer between the spine and the sail, back side of the kite.

The color-coded Stabilizers for the kites are in essence a light carbon tube of ø 2.5 mm.

Hook the slotted ends of the stabilizer into the X-Line.

Some kites like to fly in wind too: The optional Stabilizer™ extends the wind range of the kites towards stronger winds. Flights will be calm or stable, depending on the smoothness of the wind. Without wind, the kites behave a bit more agile with the Stabilizer.

Thus, Stabilizer enabled kites fly in a huge wind spectrum, semi-statically high up in the sky or playful on a short line.

Each one of the Stabilizers is designed individually for the specific synergetic kite. An invention of the Kite-Lab.

The color-codes:

De tomaso superleggera: orange
De tomaso volante: orange
The urban ninja ultralight: green

Enjoy your high flight

1
Build up the kite as usually, check the symmetry.

2
Push through the Stabilizer near the nose, on the back side of the kite, between sail and spine.

3
Fix both slotted ends of the Stabilizer into the tensioned X-Line.

Now your kite will perform rather stable, static, but still lively flights. On asphalt, the kite becomes a bit more sensitive to abrasion in the area of the Stabilizer, smooth landings are better.

The Stabilizer is designed for high flights on long flying lines. For urban flights, especially with our small kites, a short line on Microwinder is more practical, then rather without Stabilizer.

Facts